SARV COAT 8221

Epoxy Ester top coat COATINGS



Description

Sarv coat 8221 is a single pack topcoat based on epoxy ester resin.

 

Physical Data

 

Finish............................................... Gloss, Semi gloss

Colour............................................. Upon uequest

Volume Solids............................... 48±2%

Specific Gravity............................ 1. 2 ±0.05 gr/cm3

Flash Point..................................... 23°C

Recommended D.F.T................... 40-60 microns

Theoretical coverage.................... 12-8 sqm/lit

                                                          10 -6.7 sqm/kg

Partical Coverage......................... depends on loss factor

Touch dry....................................... 2 hrs at 20°C

                                                     1 hrs at 35°C

Hard dry......................................... 16 hrs at 20°C

                                                     12 hrs at 35°C

Thermal Resistance...................... continuous 100°C

                                                      Non- continuous 150°C

Shelf life......................................... 1 year

Package.......................................... 20 liter container

 

Application Details

Application method .................... Air/Airless spray, Brush

Application temperature............. 10-50°C

Mixing ratio................................... single pack

Thinner/Cleaner............................ SVT-82

Pot life ............................................ N/A

Recoat interval.............................. Min 24 hrs

                                                           Max 3 hrs

Outstanding Characteristics

  • High colour retention
  • Good adhesion to previous coats.
  • Toughness and durability of film.
  • resistance against corrosive environments

Recommended Use

As a topcoat in industrial and marine structures such as refineries, petrochemical plants, bridges, tanks and water sewage plants.

Surface Preparation

The surface must be clean and dry. Any contamination such as dirt, grease, oil, salt and any other foreign materials should be removed.