• تهران، جنت آباد جنوبی، نبش میدان چهارباغ، ساختمان سبز، واحد 37

SARV COAT 6721

alkyd topcoat COATINGS



Description

Sarv coat 6721 is a versatile finish coat based on  long oil alkyd resin.

 

Physical Data

 

Finish............................................... semi gloss/ gloss

Colour............................................. Upon request

Volume Solids............................... 50±2%

Specific Gravity............................ 1.15±0.01 gr/cm3

Flash Point..................................... 33°C

Recommended D.F.T................... 40-60 microns

Theoretical coverage.................... 10.4-6.9 sqm/kg         

Practical Coverage....................... Depends on loss factor

Touch dry....................................... 3 hrs at 20°C

Hard dry......................................... 1 week at 20°C

Thermal Resistance...................... 120°C

Shelf life ........................................ 1 year at 25°C

Package.......................................... 20 liter container

 

Application Details

Application method..................... Air /Airless spray, Brush, Roller

Nozzle orifice................................. .019”- .021”

Nozzle pressure............................. 150 bar/ 2200 Psi

Application temperature............. 10-50°c

Mixing ratio................................... single pack

Thinner/Cleaner............................ SVT-67

Pot life ............................................ N/A

Recoat interval.............................. Min. 24 hrs.

                                                           Max indefinite

Outstanding Characteristics

  • Good gloss and colour retention
  • Excellent sprayability
  • Excellent flexibility
  • Good resistance in mildly to moderate environments.

Recommended Use

As a finish coat on exterior and interior of steel structures, wood substrates and massonaries, previously primed with alkyd primers.

Surface Preparation

The surface must be clean, dry and free from any contamination such as grease, salt and loose paint.

Old primed surfaces should be roughened before repainting.