SARV COAT 8968

Epoxy phenolic top coat COATINGS



Description

Sarv coat 8968 is a two component, polyamine cured epoxy phenolic.

 

Physical Data

 

Finish............................................... Glossy

Colour............................................. Upon request

Volume Solids............................... 65±2%

Specific Gravity............................ 1.4±0.05 gr/cm3

Flash Point..................................... 26°C

Recommended D.F.T................... 100-150 microns

Theoretical Coverage................... 6.5-4.3 sqm/lit

                                                          4.6-3.07 sqm/kg

Practical Coverage....................... Depends on loss factor

Touch dry....................................... 4 hrs at 20°C

Hard dry......................................... 7 days at 20°C

                                                          6 days at 35°C

Thermal Resistance...................... Continuous 160°C

                                                           Non-continuous 180°C

 Shelf life ....................................... 1 year at 25°C

Package.......................................... 5 & 20 liter container

 

Application Details

Application method .................... Air/Airless spray, Brush

Nozzle orifice................................. . .018"-.021"

Nozzle pressure............................. 200 bar/2900 Psi

Pump ratio..................................... Min 54:1

Mixing ratio................................... Base/Hardener 4/ 1by weight

Thinner/Cleaner............................ SVT-89

Pot life ............................................ 2 hrs at 20°C

Recoat interval min:.................... 24 hrs at 20°C

Recoat interval max:................... 21 days at 20°C

Outstanding Characteristics

  • Excellent oil resistance
  • Excellent chemical resistance against acids, and alkalies.
  • Corrosion resistance in moderately to severely environment
  • Suitable for steel & concrete exposed to splash. Spillage, fumes of corrosive chemical.
  • Suitable as a lining in storage tanks, on substate exposed to immersion and splash of seawater.

Recommended Use

As a protective coating in industrial and  marine structures, Over concrete or metal surfaces.

Resistant to a variety of chemicals, fuel oils & solvents.

As a general purpose is suitable for lining storage tanks ship tanks exposed to immersion, splash sea water.

Surface Preparation

The surface must be clean and dry. All dirt, grease, mill- scales and any other foreign materials should be removed. Old primed surfaces must be smoothly wire brushed.