Sarv Rang Product Data

SARV COAT 7732

chlorinated rubber MIo interaediate COATINGS



Description

Sarv coat 7732 is a physically drying, plastisized chlorinated rubber based intermediate coat, containing M.I.O as a  rust preventing pigment.

 

Physical Data

 

Finish............................................... Flat

Colour............................................. Grey

Volume Solids............................... 40±2%

Specific Gravity............................ 1.25±0.05 gr/cm3

Flash Point..................................... 24°C

Recommended D.F.T................... 40-60 microns

Theoretical coverage.................... 10-6.6 sqm/lit.

                                                          8-5.3 sqm/kg

Practical Coverage....................... Depends on loss factor

Touch dry....................................... 30 min at 20°C

Hard dry......................................... 2 hours at 20°C

Thermal Resistance...................... Continuous  60°

                                                           Non-continuous 65 °C

Shelf life ........................................ 12 months at 25°C

Package.......................................... 20 liter container

 

Application Details

Air/Airless spray, .......................... Application method Brush, Roller.

Nozzle orifice................................. . .017"-.021"

Nozzle pressure............................. 150 bar/2200 Psi

Application temperature............. 10-50°c

Mixing ratio................................... single pack

Thinner/Cleaner............................ SVT-77

Pot life ............................................ N/A

Recoat interval.............................. Min 6 hrs at 20°C

                                                        

Outstanding Characteristics

  • Excellent water resistance
  • Durability in severe marine atmosphere
  • Fast drying.

Recommended Use

As a water resistant intermediate coat in underwater and above water systems such as ships hulls, decks and superstructures, offshores, structural steel and pipping in chemical plants, refineries, bridges and cranes. It is also suitable for drinking water systems.

Surface Preparation

The surface must be clean, dry and free of grease, mill- scale, rust and dirt.

 

دفتر مرکزی: تهران، آیت الله کاشانی، نبش میدان چهارباغ، ساختمان سبز، واحد 37  کد پستی: 1473913774

تلفن: 44434230 - 46135826 - 46135189 - 46135417 - 44037529 - 44037534 - 44037532

فکس: 46135203  ایمیل: sarvrang.co@gmail.com

آدرس کارخانه: جاده خاوران، کیلومتر 9 شریف آباد، بعد از شهرک صنعتی عباس آباد، انتهای بلوار نگار