SARV COAT 3620

ACRYLIC topcoat COATINGS

Description

Sarv coat 3620 is a quick drying paint based on thermoplastic acrylic resin.

Physical Data

Finish............................................... Gloss

Colour............................................. Upon request

Volume Solids............................... 65±2%

Specific Gravity............................ 1.5±0.1gr/cm³

Flash Point..................................... 30°c

Recommended D.F.T................... 40-60 microns

Theoretical coverage.................... 6.3-9.5 sqm/lit.

                                                          8.48-5.56 sqm/kg

Heat resistance.............................. 120 °C

Practical Coverage....................... Depends on loss factor

Touch dry....................................... 2 hrs.at 20°c

Hard dry......................................... 14 hrs.at 20°c

Shelflife ......................................... 12 months at 25°c

Package.......................................... 20 liter container

Application Details

Application method..................... Air/Airless spray, Brush

Nozzle orifice................................. .018”- .021”

Nozzle pressure............................. 150 bar/2200 Psi

Application temperature............. 10-50°c

Mixing ratio................................... single pack

Thinner/Cleaner............................ SVT-36

Pot life ............................................ N/A

Recoat interval.............................. No limitation

Outstanding Characteristics

• High gloss and colour retention
• Good resistance to different environmental conditions
• Excellent sprayability
• High adhesion to different metallic surfaces
• Excellent flexibility

Recommended Use

For use as a finish coat on coating system of steel substrates, where a hard, glossy and adherant finish coat is required.

Surface Preparation

The surface must be clean, dry and free from any contamination such as dust, grease, oil, salt and loose paint.