Sarv Rang Product Data

SARV COAT 9521

polyurethane top coat COATINGS



Description

Sarv coat 9521 a two component, aliphatic isocyante cured polyurethane topcoat.

 

Physical Data

 

Finish............................................... Gloss/Semi gloss

Colour............................................. upon request

Volume Solids............................... 50±3%

Specific Gravity............................ 1.15 ±0.1 gr/m3

Flash Point..................................... 30°C

Recommended D.F.T................... 40-60 microns

Theoretical Coverage................... 12.5-8.3 m²/lit

                                                          10.8-7.2 m²/kg

Practical Coverage....................... Depends on loss factor

Touch dry....................................... 2 hrs at 20°C

                                                          1.5 hrs at 35°C

Fully Cured.................................... 5 days at 20°C

                                                          4 days at 35°C

Thermal Resistance...................... Continuous 90°C

                                                      Non-continuous 100°C

Shelf life......................................... 12 months

Package.......................................... 4 & 20 liter container

 

Application Details

Application method .................... Air/Airless spray, Brush

Nozzle orifice................................. . .017"

Nozzle pressure............................. 150 bar/2200 Psi

Application temperature............. . .5 to 50 °C

Mixing ratio................................... Refer to the can label

Thinner/Cleaner............................ SVT-95

Pot life ............................................ 4 hrs at 20  °C

Recoat interval.............................. Min 16 hrs

                                                      Max 72 hrs

Outstanding Characteristics

  • Excelent corrosion resistance
  • High weather and chemical resistance.
  • Excelent gloss and colour retention
  • Easy to clean

Recommended Use

As a protective finish coat for protection of structural steel where superior performance, attractive appearance, gloss retention and high corrosion resistance is required, shuch as chemical plants, pulp & paper mills, off-shore platforms, petroleum refineries and containers.

Surface Preparation

The surface must be clean and dry. All dirt, grease, mill- scales and any other foreign materials should be removed. For old primed surfaces, it may be necessary to roughen the surface.

 

 

 

   Revised

May-2010

 

 

دفتر مرکزی: تهران، آیت الله کاشانی، ابتدای جنت آباد جنوبی، نیش کوچه پاستور، ساختمان سهیل، واحد 5 و 6  کد پستی: 1473913774

تلفن: 44045187 - 44043081 - 44486491 - 44037534 - 44037532

فکس: 44037529  ایمیل: sarvrang.co@gmail.com

آدرس کارخانه: جاده خاوران، کیلومتر 9 شریف آباد، بعد از شهرک صنعتی عباس آباد، انتهای بلوار نگار