Sarv Rang Product Data

SARV COAT 8829

Epoxy polyamine zing phosphate primer COATINGS



Description

Sarv coat 8829 is a two component, polyamine cured epoxy primer, containing zinc phosphate as corrosion inhibiting pigment.

 

Physical Data

 

Finish............................................... Flat- Semi flat

Colour............................................. Grey, white

Volume Solids............................... 54%

Specific Gravity............................ 1.30±0.05 gr/cm3

Flash Point..................................... 26°C

Dry Film Thickness....................... 40-60 microns

Theoretical coverage.................... 13.5-9 sqm/lit.

                                                          10.34-6.9 sqm/kg

Touch dry....................................... 2 hrs at 20°C

Hard dry......................................... 7 days at 20°C

Thermal Resistance...................... 140°C

Practical Coverage....................... depends on loss factor

Shelf life ........................................ 1 year at 25°C

 

Application Details

Application method .................... Air/Airless spray, Bursh

Nozzle orifice................................. . .021"

Nozzle pressure............................. 150 bar/2200 Psi

Application temperature............. 10-50°C

Mixing ratio................................... Base/Hardener 10/ 1by weight

Thinner/Cleaner............................ SVT- 88

Pot life ............................................ 2 hrs at 20°C

Recoat interval.............................. Min 24 hrs

                                                           Max 72 hrs

Outstanding Characteristics

  • Suitable for application on blasted steel
  • Suitable as first coat in various paint systems
  • Suitable for application under humid condition.
  • Suitable for water immersion.

Recommended Use

As a general purpose rust preventing primer for epoxy and urethane systems on steel and other metal surfaces.

Surface Preparation

Remove oil and grease, etc. with suitable detergent. Remove salt and other contaminants by (high pressure) fresh water cleaning. Clean damaged area thoroughly by power tool cleaning to ST3(minor areas)

Or by abrasive blasting to minimum SA2, Preferably to SA2½ (for repair and maintenance)

Abrasive blasting to Sa 2½ SSPC-10 (for new steel)

 

دفتر مرکزی: تهران، آیت الله کاشانی، نبش میدان چهارباغ، ساختمان سبز، واحد 37  کد پستی: 1473913774

تلفن: 44434230 - 46135826 - 46135189 - 46135417 - 44037529 - 44037534 - 44037532

فکس: 46135203  ایمیل: sarvrang.co@gmail.com

آدرس کارخانه: جاده خاوران، کیلومتر 9 شریف آباد، بعد از شهرک صنعتی عباس آباد، انتهای بلوار نگار