• تهران، جنت آباد جنوبی، نبش میدان چهارباغ، ساختمان سبز، واحد 37

SARV COAT 8731

Epoxy polyamide high build/high solid self primer COATINGS



Description

Sarv coat 8731 is a two component polyamide cured, high build epoxy primer & intermediate, containing zinc phosphate as corrosion inhigiting pigment.

 

Physical Data

 

Finish............................................... Semi gloss

Colour............................................. Upon request

Volume Solids............................... 85% (ASTM-D-2697 modified)

Specific Gravity............................ 1.31 kg(mixed produet)

Flash Point..................................... 24°C

Dry Film Thickness....................... 125 microns per coat

Theoretical coverage.................... 6.8 m2/L at 125 microns

Touch dry....................................... 6 hrs at 20°C

Hard dry......................................... 7 days 20°C

                                                          5 days at 35°C

Thermal Resistance...................... 140 °C

Practical Resistance..................... depends on loss factor

Shelf life......................................... 1 year at 25°C

Package.......................................... 5 & 20 liter container

 

Application Details

Application method .................... Air/Airless spray, Brush

Nozzle orifice................................. .021”

Nozzle pressure............................. 50 bar/3600 Psi

Mixing ratio................................... Base/Hardener 4/1/ by weight

Thinner/Cleaner............................ SVT-87

Pot life ............................................ 8 hrs at 20°C

Recoat interval min:.................... (24 hrs at 20°C)

Recoat interval max:................... (14 days at 20°C)

Outstanding Characteristics

  • Suitable for application on blasted steel
  • Good cutting and welding properties
  • Suitable as a first coat in various paint systems
  • Suitable for application under humid condition.
  • Suitable for water immersion.

Recommended Use

As a high build, rust preventing primer & intermediate for epoxy and urethane systems on steel and other metal surfaces.

Surface Preparation

Remove oil and grease, etc. with suitable detergent. Remove salt and other contaminants by (high pressure) fresh water cleaning.

Abrasive blasting to Sa 2½, SSPC-10 with a sharp-edged surface profile corresponding to rugotest No.3, BN9a, keane – Tator comparator, 2.0 G/S or ISO comparator, medium(G).