SARV COAT 8222

Epoxy Ester intermediate COATINGS



Description

Sarv coat 8222 is a single pack coating based on epoxy ester resin.

 

Physical Data

 

Finish............................................... semi gloss

Colour............................................. Upon uequest

Volume Solids............................... 38±2%

Specific Gravity............................ 1.33 ±0.05 gr/cm3

Flash Point..................................... 23°C

Recommended.............................. 40-60 microns

Theoretical coverage.................... 9.5-6.33 sqm/lit

                                                          7.14 -4.76 sqm/kg

Practical Coverage....................... depends on loss factor

Touch dry....................................... 60 min at 20°C

Hard dry......................................... 20 hrs at 20°C

Thermal Resistance...................... 140°C

Shelf life......................................... 1 year at 25°C

Package.......................................... 20 liter container

 

Application Details

Application method .................... Air/Airless spray, Brush

Nozzle orifice................................. . .019"-.023"

Nozzle pressure............................. 150 bar/2200 Psi

Application temperature............. 10-50°C

Mixing ratio................................... single pack

Thinner/Cleaner............................ SVT-82

Pot life ............................................ N/A

Recoat interval.............................. Min 24 hrs

                                                           Max 3 months

Outstanding Characteristics

  • High corrosion resistance
  • Good adhesion to previous and  subsequent coats.
  • Toughness and durability of film.
  • Good temperature resistance

Recommended Use

As a intermediate or topcact in industrial and marine structures such as refineries, petrochemical plants, bridges, tanks and water sewage plants.

Surface Preparation

The surface must be clean and dry. Any contamination such as dirt, grease, oil, salt and any other foreign materials should be removed.