SARV COAT 6726

alkyd  red oxid rrimer COATINGS



Description

Sarv coat 6726 is a general purpose red oxide primer based on long oil alkyd resin.

 

Physical Data

 

Finish............................................... Flat

Colour............................................. Red-Brown

Volume Solids............................... 48±2%

Specific Gravity............................ 1.5±0.05 gr/cm3

Flash Point..................................... 38°C

Recommended D.F.T................... 40-60 microns

Theoretical coverage.................... 12-8 sqm/lit.

                                                          8-5.3 sqm/kg

Practical Coverage....................... Depends on loss factor

Touch dry....................................... 3 hrs at 20°C

Hard dry......................................... 1 weak at 20°C

Shelf life ........................................ 12 months at 25°C

Thermal Resistance...................... 100°C

Package.......................................... 20 liter container

 

Application Details

Application method..................... Air /Airless spray, Brush, Roller

Nozzle orifice................................. .018”- .021”

Nozzle pressure............................. 150 bar/ 2200 Psi

Application temperature............. 10-50°c

Mixing ratio................................... single pack

Thinner/Cleaner............................ SVT 67

Pot life ............................................ N/A

Recoat interval.............................. Min. 24 hrs.

                                                           Max 1 months

Outstanding Characteristics

  • Rust preventing
  • Excellent sprayability
  • Excellent flexibility
  • Good Resistance in midly to moderate corrosive environment

Recommended Use

For use on structural steel to be topcoated with oil based finish coats.

Surface Preparation

Remove oil and grease, etc with suitable detergent

Remove salt and other contaminants by (high pressure) fresh water cleaning.

A brasive blasting to minimum Sa 2 alternatively power tool cleaning to ST3.