SARV COAT 3620ACRYLIC topcoat COATINGS |
|
DescriptionSarv coat 3620 is a quick drying paint based on thermoplastic acrylic resin.
|
Physical Data
Finish............................................... Gloss Colour............................................. Upon request Volume Solids............................... 65±2% Specific Gravity............................ 1.5±0.1gr/cm3 Flash Point..................................... 30°c Recommended D.F.T................... 40-60 microns Theoretical coverage.................... 6.3-9.5 sqm/lit. 8.48-5.56 sqm/kg Heat resistance.............................. 120 °C Practical Coverage....................... Depends on loss factor Touch dry....................................... 2 hrs.at 20°c Hard dry......................................... 14 hrs.at 20°c Shelflife ......................................... 12 months at 25°c Package.......................................... 20 liter container Application DetailsApplication method..................... Air/Airless spray, Brush Nozzle orifice................................. .018”- .021” Nozzle pressure............................. 150 bar/2200 Psi Application temperature............. 10-50°c Mixing ratio................................... single pack Thinner/Cleaner............................ SVT-36 Pot life ............................................ N/A Recoat interval.............................. No limitation |
Outstanding Characteristics
|
|
Recommended UseFor use as a finish coat on coating system of steel substrates, where a hard, glossy and adherant finish coat is required. |
|
Surface PreparationThe surface must be clean, dry and free from any contamination such as dust, grease, oil, salt and loose paint.
|