SARV COAT 1861

acrylic silicone COATINGS



 

 

Description

Sarv coat 1861 is a high Temperature resistant, paint, based on modified silicone-acrylic resin.

 

Physical Data

 

Finish............................................... Semi Gloss

Colour............................................. aluminium

Volume Solids............................... 38±2%

Specific Gravity............................ 1.05±0.05 gr/Cm3

Flash Point..................................... 25°C

Recommended D.F.T................... 25-40 microns

Theoretical Coverage................... 15.2-9.5 sqm/lit

                                                          14.47-9.04 sqm/kg

Practical Coverage....................... Depends on loss factor

Touch dry....................................... 120 min at 20°C

Hard dry......................................... after thermal curing

Thermal Resistance...................... Continuous 400°C

                                                           noncontinuous 440 °C

Shelf life......................................... 1 year at 25°C

Package.......................................... 20 liter container

 

Application Details

Application method .................... Air/Airless spray, Brush

Nozzle orifice................................. . .017"

Nozzle pressure............................. 125 bar/1800 Psi

Mixing ratio................................... Single pack

Thinner/Cleaner............................ SVT-18

Pot life ............................................ N/A

Recoat interval min:.................... 24 hrs at 20 °C

Recoat interval max:................... (see Remarks overleaf)

Outstanding Characteristics

  • Rust preventing
  • Excellent sprayability.
  • Withstanding extreme thermal shocks
  • Excellent recoatability without stoving between coats
  • Applicable over zine silicate sarv caot 1983 or directly on blasted steel.

Recommended Use

As a temperature resistant paint, for use in protection of steel surfaces subjected to temperatures up to 400°C.

Surface Preparation

Remove oil and grease, etc. with suitable detergent.

Remove salt and other contaminants by(high pressure) fresh water cleaning.

Abrasive blasting to Sa2½, SSPC-10.